Bullhead Tees, also referred to as Bullnose Tees, are pipe fittings from Sheet Metal Connectors, Inc. that are manufactured with an elbow lock seam, lap seam (i.e. stitch weld, riveted, tack weld or solid weld), standing seam or butt weld seam. These can be shipped with or without duct sealant, based on your preference.
Submittal PDFBullhead Tees can be manufactured with:
• Complete Seal Spiral Pipe System – 6″ to 24″ Diameter (even sizes)
• E-Z Flange Jr. with Barrel Clamp – 6″ to 24″ Diameter
• E-Z Flange with Barrel Clamp – 26″ to 96″ Diameter
• Standard Spiral End
• Companion Angle Ring
Bullhead Tee (Bullnose)
Dimensions to be listed as follows: A, B, C
All fittings are 1.75″ from the bead to the end of the fitting.
Contact us for more information or to get a quote for Bullhead Tees.
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
