90 Degree Conical Duct Tees from Sheet Metal Connectors are fittings manufactured with an increased area at the attachment point of the tap. This allows for greater airflow to the branch. These may be manufactured with an elbow lock seam, lap seam (i.e. stitch weld, riveted, tack weld or solid weld), standing seam or butt weld seam. These may be with or without duct sealant.
Submittal PDFAll fittings can be manufactured with:
• Complete Seal Spiral Pipe System – 6″ to 24″ Diameter (even sizes)
• E-Z Flange Jr. with Barrel Clamp – 6″ to 24″ Diameter
• E-Z Flange with Barrel Clamp – 26″ to 96″ Diameter
• Standard Spiral End
• Companion Angle Ring
Conical Tee
Dimensions to be listed as follows: A, B, C
L = C + 5″
Each tee is 1.75″ from the bead to the end of the fitting.
Contact us for a quote or to learn more about our 90 Degree Conical Tees.
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
E-Z Flange Spiral Pipe System
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
