UL recognized, Duct Ties are packaged 25 per bag. They can be installed by hand using the installation tool, which tensions and then cuts.
All HVAC Accessories Products
- Access Doors
- Access Doors – Rectangular Ductwork
- Access Doors – Round Spiral Ductwork
- ATCO – R4.2 Insulated Flexible Duct
- Butyl Tape
- Cable Hanging Systems
- Canvas Duct Connector
- Chip Brush 2-Inch
- Close Cell Neoprene
- Companion Rings
- Condu Locks
- Condu-Clamp
- Condu-Lock
- Diffusers
- DP 2590 Solvent Based Spray Adhesive
- DP 77 Industrial Spray Adhesive
- DP1010 Water Based Duct Sealant – Gray
- DP2501 Water Based Duct Liner Adhesive – Clear
- Duct Cap & Duct Wrap
- Ductcap – 14in – 38in
- Ductcap – 6in – 14in
- Ductwork Tools
- Egg Crate
- End Bearing Line – 1/2in Open End
- End Bearing Line – 3/8in Acorn Nut Handle
- End Bearing Line – 3/8in Closed End
- End Bearing Line – 3/8in Open End
- Engineering End Bearing Line – 1/2in Closed End
- EZ Rail and Acoustic Turning Vane
- EZ Rail and Hollow Turning Vane – 4in
- EZ Rail II Snap Lock and Single-Wall Turning Vanes
- Fixed Pattern Diffusers – 2 Cone
- Fixed Pattern Diffusers – 3 Cone
- Flanges
- Flexible Duct Connector – 3 x 3 x 3 – equal to MBX
- Flexible Duct Connector – 4 x 4 x 4 – TDC
- Flexible Duct Connector – Aluminum – 3 x 3 x 3
- Flexible Duct Connector – Jr. Canvas – 2 x 3 x 2
- Flexible Duct Connector – Stainless – 3 x 3 x 3
- Full Blast Gates
- Galvanized R-Angle
- Gaskets
- Hammer-On Regulator Sets
- Handles, Extensions, Standoffs & Regulators
- Heavy Duty Flexible Duct Ties
- HVAC Slip and Drive Connection
- Mechanical System Hanger – Clutcher
- Notch Lock
- Nylon Ties
- Polyken 229 Duct Tape – Silver
- Polyken 330 Duct Tape – Aluminum
- Polyken 339 Printed Duct Tape – Aluminum
- Polyken 557 Printed Duct Tape – Silver
- Polyken 827 Duct Tape – White
- Regulators and Sets – 1/2in Quadrant
- Regulators and Sets – 3/8in Dial
- Regulators and Sets – 3/8in Quadrant
- Save on Labor with SMC Turning Vane and E-Z Rail
- Sealant and Adhesives
- Special Fabrics Flexible Duct Connector
- Standoffs – Elevated Damper Regulator
- Struts, Couplings, Nuts and Washers
- TDC Accessories
- TDC and TDF Connections
- Tek & Zip Screws
- TEK Sheet Metal Screws – 10 x 1/2in
- TEK Sheet Metal Screws – 10 x 1in
- TEK Sheet Metal Screws – 10 x 3/4in
- Tensioning Tool
- Tensioning Tool
- Tie Rod Reinforcement
- Wire Mesh (Bird Screen)
- Wire Rope 7×7
- Zip Sheet Metal Screws – 10 x 1/2in
- Zip Sheet Metal Screws – 10 x 1in
see more products
Heavy Duty Flexible Duct Ties
Duct Ties are made from nylon in two sizes: 36″ for 10″-15″, and 48″ for 15″-20″. Featuring a head design that easily accepts the strap end and requires low insertion force, these straps provide 225lbs. average loop tensile strength for secure installation.
Categories: HVAC Accessories, Spiral Pipe and Fittings
Related products
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings