90° Pressed Saddle No Damper with E-Z Flange
Dimensions to be listed as follows:
A on B
All Fittings are 1.75″ from Bead to End of Fitting.
90 Degree Pressed Saddles No Damper with E-Z Flange
All stamped fittings are manufactured from extra deep drawing steel (EDDS) in accordance with ASTM–A653. This type of steel is manufactured by domestic steel mills and has some unique qualities. Stamped fittings are precision drawn, tolerances must be within + or – .002 thickness to assure a quality product at all times. All pressed fittings are made of 24 Ga. or 22 Ga. Galvanized material with a G60 or better coating thickness and is chemically treated to retard white rust.
Submittal PDFRelated products
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
90 Degree Pressed Saddles with 2-Inch Stand Off with E-Z Flange
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
