Definitions Category: Reinforcement

1/2″ Diameter electric metallic tube with galvanized zinc coating is cut to length with star nuts are installed into each end and installed into your duct to provide added rigidity and strength against deflection.

3/4″ Diameter electric metallic tube with galvanized zinc coating is cut to length with star nuts are installed into each end and installed into your duct to provide added rigidity and strength against deflection.

3/4″ Diameter electric metallic tube with galvanized zinc coating is cut to length with star nuts are installed into each end and shipped loose for you to install into your duct in the field to provide added rigidity and strength against deflection.

1/2″ Diameter electric metallic tube with galvanized zinc coating is cut to length with star nuts are installed into each end and installed into your duct to provide added rigidity and strength against deflection. In Doublewall duct conduit will pass through the inner and attach to the outer pressure shell.

3/4″ Diameter electric metallic tube with galvanized zinc coating is cut to length with star nuts are installed into each end and installed into your duct to provide added rigidity and strength against deflection. In Doublewall duct conduit will pass through the inner and attach to the outer pressure shell.

R-Angle reinforcement brackets 1.5″x1.5″ made from 16ga galvanized G-60 material. Shipped loose to be installed in the field. R-angle adds rigidity to your ductwork to minimize deflection and allow your duct to be constructed from a lighter gauge.

R-Angle reinforcement brackets 1.5″x1.5″ made from 14ga galvanized G-60 material. Shipped loose to be installed in the field. R-angle adds rigidity to your ductwork to minimize deflection and allow your duct to be constructed from a lighter gauge.

R-Angle reinforcement brackets 1.5″x1.5″ made from 10ga galvanized G-60 material. Shipped loose to be installed in the field. R-angle adds rigidity to your ductwork to minimize deflection and allow your duct to be constructed from a lighter gauge.

R-Angle reinforcement brackets 2″x1.5″ made from 10ga galvanized G-60 material. Shipped loose to be installed in the field. R-angle adds rigidity to your ductwork to minimize deflection and allow your duct to be constructed from a lighter gauge.

R-Angle reinforcement brackets 2.25″x1.5″ made from 10ga galvanized G-60 material. Shipped loose to be installed in the field. R-angle adds rigidity to your ductwork to minimize deflection and allow your duct to be constructed from a lighter gauge.

R-Angle reinforcement brackets 2.5″x1.5″ made from 10ga galvanized G-60 material. Shipped loose to be installed in the field. R-angle adds rigidity to your ductwork to minimize deflection and allow your duct to be constructed from a lighter gauge.

R-Angle reinforcement brackets 2.875″x1.5″ made from 10ga galvanized G-60 material. Shipped loose to be installed in the field. R-angle adds rigidity to your ductwork to minimize deflection and allow your duct to be constructed from a lighter gauge.

Double R-Angle reinforcement brackets 2.5″x1.5″ made from 10ga galvanized G-60 material. Shipped loose to be installed in the field mounted back to back. R-angle adds rigidity to your ductwork to minimize deflection and allow your duct to be constructed from a lighter gauge.

R-Angle reinforcement brackets 1.5″x1.5″ made from 16ga galvanized G-60 material. Shipped installed from the factory on your duct or fittings. R-angle adds rigidity to your ductwork to minimize deflection and allow your duct to be constructed from a lighter gauge.

R-Angle reinforcement brackets 1.5″x1.5″ made from 14ga galvanized G-60 material. Shipped installed from the factory on your duct or fittings. R-angle adds rigidity to your ductwork to minimize deflection and allow your duct to be constructed from a lighter gauge.

R-Angle reinforcement brackets 1.5″x1.5″ made from 10ga galvanized G-60 material. Shipped installed from the factory on your duct or fittings. R-angle adds rigidity to your ductwork to minimize deflection and allow your duct to be constructed from a lighter gauge.

R-Angle reinforcement brackets 2″x1.5″ made from 10ga galvanized G-60 material. Shipped installed from the factory on your duct or fittings. R-angle adds rigidity to your ductwork to minimize deflection and allow your duct to be constructed from a lighter gauge.

R-Angle reinforcement brackets 2.25″x1.5″ made from 10ga galvanized G-60 material. Shipped installed from the factory on your duct or fittings. R-angle adds rigidity to your ductwork to minimize deflection and allow your duct to be constructed from a lighter gauge.

R-Angle reinforcement brackets 2.5″x1.5″ made from 10ga galvanized G-60 material. Shipped installed from the factory on your duct or fittings. R-angle adds rigidity to your ductwork to minimize deflection and allow your duct to be constructed from a lighter gauge.

R-Angle reinforcement brackets 2.875″x1.5″ made from 10ga galvanized G-60 material. Shipped installed from the factory on your duct or fittings. R-angle adds rigidity to your ductwork to minimize deflection and allow your duct to be constructed from a lighter gauge.

Double R-Angle reinforcement brackets 2.5″x1.5″ made from 10ga galvanized G-60 material. Shipped installed back to back from the factory on your duct or fittings. R-angle adds rigidity to your ductwork to minimize deflection and allow your duct to be constructed from a lighter gauge.