Pipe to Pipe connections are made by using a fitting size coupling that slips inside the mating pipe sections, as shown. A stop bead runs around the middle of the coupling to center the coupling in the connection. Secure the connection by installing sheet metal screws through the outer shell of the duct, 1/2 inch from the stop bead.
All Polyvinyl Duct (PVS) Products
- 45 Degree Adjustable PVC Angles
- 45 Degree Full Saddle
- 45 Degree Register Saddle
- 45 Degree Standing PVC Angles
- 45 Degree Swedged Saddle
- 90 Degree Adjustable PVC Elbows and Angles
- 90 Degree Register Saddle
- 90 Degree Standing Seam Elbows
- 90 Degree Swedged Saddle
- 90 Degree Tee Polyvinyl Coated
- Concentric Reducer Polyvinyl Coated
- Connector (Coupling)
- Cross Polyvinyl Coated
- Cross with Reducer Polyvinyl Coated
- E-Z Flange Jr. with Barrel Clamp – 6 to 24-inch Diameter
- E-Z Flange with Barrel Clamp – 26 to 96-Inch Diameter
- E-Z Tap Collar Polyvinyl Coated
- E-Z Tap Collar with Damper Polyvinyl Coated
- E-Z Tap Conical Takeoff Collar Polyvinyl Coated
- E-Z Tap Conical Takeoff Collar with Damper Polyvinyl Coated
- Eccentric Reducer Polyvinyl Coated
- End Cap (Plug)
- Notched Collars
- PVC 90 Degree Full Saddle
- PVC Register Boot
- Standard Spiral Pipe Connector
- Tee with Reducer Polyvinyl Coated
Related products
Polyvinyl Duct (PVS)
Polyvinyl Duct (PVS)
Polyvinyl Duct (PVS)
Polyvinyl Duct (PVS)
Polyvinyl Duct (PVS)
Polyvinyl Duct (PVS)
Polyvinyl Duct (PVS)
Polyvinyl Duct (PVS)
Polyvinyl Duct (PVS)
Polyvinyl Duct (PVS)
Polyvinyl Duct (PVS)
Polyvinyl Duct (PVS)