All fittings can be manufactured with:
• E-Z Flange Jr. with Barrel Clamp – 6” to 24” Diameter
• E-Z Flange with Barrel Clamp – 26” to 96” Diameter
Concentric Reducer
Dimensions to be listed as follows:
A, B
LR = See Chart
SMC spiral fittings are manufactured with an elbow lock seam, lap seam (i.e. stitch weld, riveted, tack weld or solid weld), standing seam or butt weld seam. These may be with or without duct sealant.
Submittal PDF
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
90 Degree Pressed Saddles with Volume Damper with E-Z Flange
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
90° Pressed Saddles with 1-1/2-inch Stand Off with E-Z Flange
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System