90o Tees with E-Z Flange
Dimensions to be listed as follows: A, B, C
L = “C” + 2”
SMC spiral fittings are manufactured with an elbow lock seam, lap seam (i.e.
Dimensions to be listed as follows: A, B, C, Length
90 Degree Tee No Damper with E-Z Flange
SMC spiral fittings are manufactured with an elbow lock seam, lap seam (i.e. stitch weld, riveted, tack weld or solid weld), standing seam or butt weld seam. These may be with or without duct sealant.
Submittal PDFRelated products
E-Z Flange Spiral Pipe System
90 Degree Pressed Saddles with Volume Damper with E-Z Flange
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
90 Degree Two Piece Pressed Solid Welded Elbows with E-Z Flange
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
90 Degree Pressed Saddles with 2-Inch Stand Off with E-Z Flange
