SMC spiral fittings are manufactured with an elbow lock seam, lap seam (i.e. stitch weld, riveted, tack weld or solid weld), standing seam or butt weld seam. These may be with or without duct sealant.
Submittal PDF
All fittings can be manufactured with:
• E-Z Flange Jr. with Barrel Clamp – 6″ to 24″ Diameter
• E-Z Flange with Barrel Clamp – 26″ to 96″ Diameter
90° Swedged Saddle
Dimensions to be listed as follows: A on B
90° Swedged Saddle for spiral pipe system and ductwork with E-Z Flange.
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
90° Pressed Saddles with 1-1/2-inch Stand Off with E-Z Flange
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
E-Z Flange Spiral Pipe System
