90 Degree Conical Cross product for spiral pipe and ductwork systems. SMC spiral fittings are manufactured with an elbow lock seam, lap seam (i.e. stitch weld, riveted, tack weld or solid weld), standing seam or butt weld seam. These may be with or without duct sealant.
Submittal PDFAll fittings can be manufactured with:
• Complete Seal Spiral Pipe System – 6″ to 24″ Diameter (even sizes)
• E-Z Flange Jr. with Barrel Clamp – 6″ to 24″ Diameter
• E-Z Flange with Barrel Clamp – 26″ to 96″ Diameter
• Standard Spiral End
• Companion Angle Ring
Conical Cross
Dimensions to be listed as follows: A, B, C, D
L = Larger of “C” or “D” + 5″
All Fittings are 1.75″ from Bead to End of Fitting.
E-Z Flange Spiral Pipe System
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
Spiral Pipe and Fittings
