Ductcap™ is designed to meet mechanical engineers specifications. When using Ductcap™ to cover all round duct-wall penetrations it will keep moisture, dirt, particles, dust and debris from entering the air handling system. This is done without tape, screws or nylon ties. Ductcap™ is inexpensive, labor saving and reusable! The use of Ductcap™ will save time, money and will enable contractors to deliver a better product to their customers.
All HVAC Accessories Products
- Access Doors
- Access Doors – Rectangular Ductwork
- Access Doors – Round Spiral Ductwork
- ATCO – R4.2 Insulated Flexible Duct
- Butyl Tape
- Cable Hanging Systems
- Canvas Duct Connector
- Chip Brush 2-Inch
- Close Cell Neoprene
- Companion Rings
- Condu Locks
- Condu-Clamp
- Condu-Lock
- Diffusers
- DP 2590 Solvent Based Spray Adhesive
- DP 77 Industrial Spray Adhesive
- DP1010 Water Based Duct Sealant – Gray
- DP2501 Water Based Duct Liner Adhesive – Clear
- Duct Cap & Duct Wrap
- Ductcap – 14in – 38in
- Ductcap – 6in – 14in
- Ductwork Tools
- Egg Crate
- End Bearing Line – 1/2in Open End
- End Bearing Line – 3/8in Acorn Nut Handle
- End Bearing Line – 3/8in Closed End
- End Bearing Line – 3/8in Open End
- Engineering End Bearing Line – 1/2in Closed End
- EZ Rail and Acoustic Turning Vane
- EZ Rail and Hollow Turning Vane – 4in
- EZ Rail II Snap Lock and Single-Wall Turning Vanes
- Fixed Pattern Diffusers – 2 Cone
- Fixed Pattern Diffusers – 3 Cone
- Flanges
- Flexible Duct Connector – 3 x 3 x 3 – equal to MBX
- Flexible Duct Connector – 4 x 4 x 4 – TDC
- Flexible Duct Connector – Aluminum – 3 x 3 x 3
- Flexible Duct Connector – Jr. Canvas – 2 x 3 x 2
- Flexible Duct Connector – Stainless – 3 x 3 x 3
- Full Blast Gates
- Galvanized R-Angle
- Gaskets
- Hammer-On Regulator Sets
- Handles, Extensions, Standoffs & Regulators
- Heavy Duty Flexible Duct Ties
- HVAC Slip and Drive Connection
- Mechanical System Hanger – Clutcher
- Notch Lock
- Nylon Ties
- Polyken 229 Duct Tape – Silver
- Polyken 330 Duct Tape – Aluminum
- Polyken 339 Printed Duct Tape – Aluminum
- Polyken 557 Printed Duct Tape – Silver
- Polyken 827 Duct Tape – White
- Regulators and Sets – 1/2in Quadrant
- Regulators and Sets – 3/8in Dial
- Regulators and Sets – 3/8in Quadrant
- Save on Labor with SMC Turning Vane and E-Z Rail
- Sealant and Adhesives
- Special Fabrics Flexible Duct Connector
- Standoffs – Elevated Damper Regulator
- Struts, Couplings, Nuts and Washers
- TDC Accessories
- TDC and TDF Connections
- Tek & Zip Screws
- TEK Sheet Metal Screws – 10 x 1/2in
- TEK Sheet Metal Screws – 10 x 1in
- TEK Sheet Metal Screws – 10 x 3/4in
- Tensioning Tool
- Tensioning Tool
- Tie Rod Reinforcement
- Wire Mesh (Bird Screen)
- Wire Rope 7×7
- Zip Sheet Metal Screws – 10 x 1/2in
- Zip Sheet Metal Screws – 10 x 1in
see more products
Ductcap – 6in – 14in
Ductcap™ is designed to meet mechanical engineers specifications. When using Ductcap™ to cover all round duct-wall penetrations it will keep moisture, dirt, particles, dust and debris from entering the air handling system. This is done without tape, screws or nylon ties. Ductcap™ is inexpensive, labor saving and reusable! The use of Ductcap™ will save time, money and will enable contractors to deliver a better product to their customers.
Submittal PDF
Category: HVAC Accessories
Related products
HVAC Accessories
HVAC Accessories
HVAC Accessories
HVAC Accessories
HVAC Accessories
HVAC Accessories
HVAC Accessories
HVAC Accessories
HVAC Accessories
HVAC Accessories
HVAC Accessories
HVAC Accessories